ATU-100 1.8-50MHz Antenna Automatic Antenna Tuner 0.96 Inch OLED assembled UHF

Description: ATU-100 assembled machine 1.8-50MHz Antenna Automatic Antenna Tuner 0.96 Inch OLED with UHF ConnectorDescriptionNOTE：Recommended maximum power while tuning not above 30 watts. (after tuning you can other watts and work on this power,100W is the limit, too high, it is not recommended to adjust to 100W ) 1.The latest firmware version is 3.2：（1）SWR greater than 1.1 will automatically activate tuning, and the minimum power has been changed from 5W to 1W. 3.2 Program can be tuned below 5W. However, Too low value may result in insufficiently fine tuning (original default is greater than 5W auto tuning) , please know before placing an order.（2）Fixed bug with continuous data transfer to the display.（3）Added a new ability to disable all relays along with the timer display. New cell 35-01 to activate the refunction. Display Off Timer setup - cell 32.You can use this future in your QRP setup where power consumption is critical.（4）Timeout for display reset increased to 2 seconds. This is required for some OLED displays with a very chain on the reset pin.2. Accessories:All ue Samsung SMD capacitors, C-channel capacitors, we use Samsung 1000V high-voltage SMD capacitors (the original default uses 500V), and the PIC chip imported from the United States. 3.Parameter Description:-Power supply range: 10-15 VDC-Max current: 450mA-Max working power: 100 watts-Max measured power: 150 watts-Minimum power for tuning start: 1 watt-Recommended maximum power while tuning not above 30 watts. (after tuning you can set 100 watts and work on this power)-Minimum measured power: 0.1 watt-Step for measurement on powers under 10 watts: 0.1 watt-Step for measurement on powers above 10 watts: 1 wattNOTE:Insufficient tuning may occur within 5W. So try not to be lower than 5W.-Power measurement accuracy: 10%-Maximum inductance set: 8.5 uH-Minimal step for setting inductance: 0.1 uH-Maximum installed capacity: 1870 pF-Minimal step for setting capacity: 10 pF Package Included: -1 x Automatic Antenna Tuner machine with Shell（No battery）Weight: 550g SIZE: 140 x 88 x 38 mm (L*W*H)-Contains the following items:1. Machine with UHF connectors *1 (UHF female connectors, also named SO239/SL16/PL259) 2. DC5.5 x 2.1 power cord*1 (0.75 square pure copper wire 50cm) 3. USB 5V to 9V booster board*1The front and rear panels are made of metal. Note: The product is assembled and with shell，It is a finished machine,Can connect to your device directly.Payment Terms1.PayPal.2.All major credit cards.3.Please make sure your address is correct before you pay and can be delivered.Return Terms1. If the item you receive is defective, please contact us within 7 days after receiving the goods. We will guide you to return for replacement or refund.2. If you buy under incorrect conditions, please note that all return shipping fees should be paid by the buyer, unless the goods are DOA.3. We reserve the right to refuse any return for the buyer (such as dislike, unsuitability) and other reasons.Custom Duties & Taxes1. The item price or postage does not include import duties, taxes and fees, and the above fees are paid by the buyer.2. In order to avoid unnecessary troubles, please tell us what the value should be declared before shipmentFeedback1. Satisfaction: If you are satisfied with the product, please leave me positive feedback and your truest language.2. Dissatisfied: If you are dissatisfied for any reason, please do not give us neutral or negative feedback immediately. I will actively solve the problem for you.Solution:If there is any problem with your order, please feel free to contact us. We are a responsible and reliable seller and will handle it for you as soon as possible.Finally, I wish you a happy shopping, best wishes.

Price: 68 USD

Location: 深圳市

End Time: 2024-08-09T07:50:14.000Z

Shipping Cost: 0 USD