Blackmagic Design ATEM 1 M/E Production Studio 4K Switcher

Description: This is a brand new unit that was purchased as a backup unit for the studio and never used. We upgraded the studio and this unit is no longer needed. I upgraded the unit to the latest firmware version and tested it to verify everything is in good working order. Unit comes in original box and with a power cord. Key FeaturesSupports NTSC/PAL/HD/UHD 4K at 10-bitSupports 4K Resolution over SDI or HDMI1 x HDMI & 10 x 6G-SDI InputsTri-Sync/Black Burst Ref Sync Input10 x Built-In Frame SynchronizersMultiview Monitoring in HDProgram Outputs in UHD/HD/SD4 x Keyers Total: 3 x Luma, 1 x Chroma12-Channel Audio MixerHardware or Software Mac/Windows Control The Blackmagic ATEM 1 M/E Production Studio 4K is a live event multicamera production switcher with 10 individual Ultra HD inputs built into a 1 RU chassis. Supporting NTSC/PAL/HD and Ultra HD video formats, the switcher connects to a wide range of cameras and sources, delivering a single program stream in UHD 4K, HD, or SD video. All this is done live and in real time with no rendering required. The switcher features a reference video input for synchronizing the switcher to other equipment using tri-level or black burst sync. Each input also features a frame synchronizer, which allows you to use cameras that do not feature genlock as well as input video from computer sources. VideoThe ATEM 1 M/E Production Studio 4K switcher supports Ultra HD 4K video (3840 x 2160), which is four times the resolution of Full HD. The video format is set by the user and must be the same across each input, as the switcher cannot scale different input formats to match the project format.The switcher features ten single-link 6G-SDI and one HDMI 4K input, which allows you to connect UHD/HD/SD and computer-based signals to the switcher. However, the HDMI input is shared with one of the SDI inputs, so you can only have a maximum of ten inputs.The switcher takes reference video in for sync timing, either black burst or tri-level sync, so it can interface with other post-production equipment.Each input incorporates a frame synchronizer, which enables you to use cameras that do not have genlock capability or to input computer sources such as Keynote or PowerPoint presentations.Video OutputsThe switcher features two program outputs for the final video, delivering UHD/HD/SD via two 6G-SDI ports and one HDMI 4K connector.The multiview output is available via an SDI or HDMI connector.The switcher features an SDI AUX output capable of delivering the program out feed with or without the downstream keyer effects in SD, HD, and Ultra HD. Control of the AUX output is by the front-mounted panel buttons and the built-in 2" LCD screen for immediate confirmation of the AUX output.Multiview MonitoringThe multiview output features four selectable screen layouts that show eight inputs or six inputs and the two internal media players, plus preview and program outputs, on one screen at the same time.EffectsTransitionsThe ATEM 1 M/E Production Studio 4K switcher features four built-in transitions:Cut: ATEM instantly changes from the current program source to the preview source precisely at the moment you hit the button. Cuts can be performed by directly selecting sources on the program bus or more commonly by pressing the cut button to transition to the next source lined up on the preview bus.Mix: This dissolves from one image to another. You can program a pre-set transition rate or use the included software control panel or available hardware panels to manually transition from one shot to another.Dip: This is similar to the mix/dissolve, except it first transitions to a color/graphic or video source and then to the next shot.Wipe patterns: With 18 built-in wipe patterns, you can create over 100 different transitions, the patterns can be inverted or softened, and you can customize the color of the border. You can also insert up to three live video streams into the borders.Key Frameable TransitionsThe built-in DVE allows you to create keyframe-based DVE moves, flying graphics, and animated stingers. KeyersThe switcher features four upstream keyers and a DVE, allowing you to layer live video, title, graphics, and animation over live video. You can choose from chroma, luma, linear, and pattern keys at Ultra HD resolution with 10-bit processing.Two downstream keyers allow you to add graphics, lower thirds, titles, and logos for a polished live production.The DVE allows you to create a picture-in-picture effect. Control InterfaceThe switcher features backlit front-panel control buttons for manual control.The ATEM 4K switcher uses an Ethernet connection to interface with control surfaces such as the optional ATEM 1 M/E and 2 M/E Broadcast Panels.You can also control the switcher by using the included ATEM Software Control software from a Mac or Windows computer over Ethernet. You can control all production settings of the switcher as well as directly import graphics from your computer into the switcher's media pool.You set the format for each project you are working on, from SD to HD to Ultra HD, selecting resolution and frame rate. This is accomplished by using either the included software for macOS/Windows PC or via the ATEM 1 M/E or ATEM 2 M/E Broadcast Panel.Using the Ethernet port on the switcher allows you to connect control surfaces directly to the switcher or control the switcher across a network.The switcher features a USB port that is used for software updates and to set the switcher's chassis IP address, which can only be done by using a computer running the ATEM Switcher Utility connected to the switcher's USB port.RackmountThe switcher is 1 RU in height and has built-in rackmount ears for mounting in a production road case or a post-production facility.

Price: 700 USD

Location: Madisonville, Texas

End Time: 2024-12-02T16:46:33.000Z

Shipping Cost: N/A USD