Burstfire - Primer Pocket Gauge Set - SMALL Primer Pocket Set

Description: Burstfire - Primer pocket Go & No-Go gauge Complete Set - Large Primer Pocket. Only primer pocket gauge on the market made to be both held by finger tips, and also threaded (industry standard 8/32) into a handle to maximize comfort when processing high volume of brass cases! Burstfire - Primer Pocket Gauge Set GO GAUGES:Never guess again if your primer pockets were properly reamed or swaged.Include large & small primer pocket gaugeEnlarged body, curved (go gauge) / Swirl (no-go) design for a secure grip to be held by handIt can also be attached to an existing industry standard 8/32 threaded hand tool handle, to maximize comfort.We all want a tight primer pocket, that will not loosen up before our brass fails. Especially if you use expensive brass.Using small primer pocket as an example. Our small gauge is made to 0.1725. Variation for small primers is 0.1745 - 0.1755 in diameter. ***Majority of small primers will be 0.175.We have found, a .175 primer, can be inserted in a .1725 pocket on a press, but may meet some resistance at .1755 (Will not work in most cases if hand priming. In this case simply set up the reamer / Swager to go just a tad bit further). ***Proper use of gauge: Make sure the gauge can be freely inserted into the pocket, without sticking / without requiring any force to push it all the way in, or pull all the way out. NO-GO GAUGES:No-Go Gauges are made .005 over max pocket dimensions. If the No-Go Gauge can be inserted, it indicates your primer pocket may be too loose for some primers. It is then recommended to either recondition the pocket, or discard/recycle the case.If you want the highest level of precision and control, this is it. But keep in mind there are variations from brand to brand, and lot to lot. Cup thickness is a factor in if it will fit or how easily it will fit as well.

Price: 16.83 USD

Location: San Ramon, California

End Time: 2024-11-04T09:56:44.000Z

Shipping Cost: 0 USD