Description: Evolution Gun Works Scope Base for Benelli Super Nova Pump Picatinny Rail 0 MOA Evolution Gun Works EGW Description Machined From: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Only Mounting Hardware: #8-40 X 1/2 Screws and T-10 Bit Included Center Spread: 2.05" Overall Length of Mount: 5.882" This Mount Fits: Benelli SuperNova Tactical Pump We have found that some models are not drilled and tapped from the factory. If that is the case, you would need to have your receiver drilled and tapped before installing our mount. If you have any questions about your specific model or receiver, we recommend contacting the manufacturer of your firearm. They should be able to confirm whether your receiver is drilled and tapped by referencing your serial number. Our mount does not work with the following model numbers: 20100 20105 20110 20115 20120 Standard vs. HD rails *The center spread is the distance between the two middle holes, center to center, on your receiver. This base sits at approximately 0.4" high. Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order). Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Add EGW's Practical or HD Scope Rings to make it a complete overhaul! We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov. Please note not all parts are "drop in". As with all gun parts some installations may require disassembly and reassembly. Some parts may require installation by a qualified gunsmith. !!ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE PERFORMING ANY MAINTAINANCE OR UPGRADES!! No Liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This product should be installed and checked by a qualified gunsmith. Not doing so or using the wrong tools may damage the part and/or your firearm. All Products are made in the USA by Americans. Should you have any questions or issues with your new product please contact me. It is my goal to make my customers 100% satisfied with their purchase (within reason). ***Please Note: All returns MUST Be In Original Packaging and in a resalable, brand new condition. Item(s) must be in new/unused/unworn condition for an exchange/refund. Application errors will incur a minimum of 15% restocking fee. If you are not sure of the product and its use please contact The Sporting Jack for applicability and questions. Used and/or damaged items must be exchanged through the specific manufacturer for warranty issues. If you have any questions or Issues, we are here to help. The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business. Thank you for your business-Dave Kravetz
Price: 29.66 USD
Location: Victor, New York
End Time: 2024-08-24T19:09:47.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Evolution Gun Works
Type: Rifle Base
For Gun Type: Rifle
Gauge/Caliber: all
Material: Aluminum
Model: 46000
Mounting: Picatinny
Mounting Location: Reciever
Sport/Activity: Shooting
California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Color: Black
Country/Region of Manufacture: United States
Features: Lightweight
Handedness: Ambidextrous
Item Height: .4
Item Weight: 3.8
Item Width: . 0.835 inches
Manufacturer Warranty: Lifetime
Set Includes: Screws and Torx Bit
Unit Quantity: 1
Unit Type: each
MPN: 46000
