Mirage FRx5 Tower Speakers Floor Loudspeaker Set Black Studio 8 Ohms RARE Biwire

Description: The Mirage FRX-5 Loudspeakers, believe that fundamental design characteristics must be maintained to produce a superior product, regardless of the cost. That is why the modestly priced "FRx-Series" shares several fundamental design criteria found in the original M series. Maintaining flat on-axis response and wide bandwidth, wide and constant dispersion, and very low distortion and resonance are therefore minimum requirements of every Mirage speaker we build. Flat on and off axis response is obtained by using our proprietary, uniquely contoured injection molded cones set in a beveled baffle that reduces edge diffraction. This makes sure that the critical midrange spectrum is accurate and produces lifelike vocals and midrange frequencies. In a live environment, 30% of what we hear is direct and up to 70% is reflected, so a speaker must have wide dispersion characteristics to faithfully and accurately recreate the original recorded music or event. Mirage Dome tweeters with cloth suspension have excellent waveform properties and are crossed over at 2KHz to maintain a wide and constant dispersion. Distortion and resonances that can irritate the listener and damage components are kept in check by using very close tolerance electrical components, well damped linear suspension designs, and cabinet dampening construction techniques. The cabinets are made of inert Medium Density Fiberboard and are rigidly braced to prevent unwanted resonances or vibrations. AMPLIFIER REQUIREMENTS The "FRx-Series" was designed to be extremely efficient and therefore very undemanding of the connected amplifier. The entire series is rated at an 8-ohm impedance with an average room efficiency of 90db. They can be played at high listening levels with average power and are capable of handling the high power output of large amplifiers. Most amplifiers with a power rating of 20-100 watts per channel will efficiently drive "FRx-Series" speakers. Greater than its rated power. Over-driven amplifier distortion is called "Clipping", easily identified by its fuzzy, distorted sound, and can damage any speaker. The volume control of most amplifiers and receivers is a logarithmic type, which means that full power may be reached with the volume control set at as little as the halfway point. Operating the loudness, treble, or bass controls increases power output well beyond rated levels. Connect the speaker wire from the positive (RED +) terminal on the amp to the positive (RED+) terminal on the speaker. Connect the negative (BLACK-) terminal on the amplifier to the negative (BLACK-) terminal on the speaker. This method can be applied to bi-wireable speakers as long as the shorting straps are in place on the terminals. Bi-Wire Connection: The musical improvements of bi-wiring your speakers can approach those of bi-amping at a substantially lower cost. The standard connection makes the wire common to the low, mid, and high frequency crossover, which is not ideal. Bi-wiring eliminates the common impedance and as a result dramatically cleans up the transition between low and high frequencies. This type of connection is possible on the Mirage FRx-Five. Some companies sell bi-wire cables, but you can also use one cable for low frequencies and one for high frequencies for this purpose. Remove the shorting straps. The tweeter's terminals are on top, the woofer's on the bottom. Twist the positive leads of the two wires together so they can both be inserted into the positive terminal on the amplifier. Follow the same procedure for the negative leads. Then connect the two positive leads to the positive terminals in back of the speaker, and the negative leads to the negative terminals Manual available for download 15-150wattts 8ohms 90db Specs / Features: Pure Metal Hybrid Dome tweeters Injection molded polypropylene cones for bass/midrange drivers Gold-plated five-way binding posts Bi-wirable and bi-ampable Sleek Black finish Magnetically shielded Gold-plated way binding posts Specifications: Type: Vented floor standing Magnetic shielding: yes Frequency Response: 40Hz-22KHz Tweeter: 3/4" pure metal hybrid Woofer: 6.5" polypropylene cone Efficiency: 90dB Impedence: 8 ohm DIMENSIONS & WEIGHT Width 7.5 in Depth 13 in Height 33 in Weight 31.97 lbs These are very high-end speakers you'd have a hard time finding better sound quality. Manual available for download Twenty percent item use deduction on item sent back I ship fast! Typically orders are shipped out promptly. All items are professionally packaged and bubble wrapped to ensure a safe delivery SmallBusinessMission Thank you for supporting our small business! We strive to provide hard to find desired items to you with ease and convenience. Our Climate Pledge helps you discover and shop for more-sustainable products by reuse, recycle, refurbish or refinish products to bring you the upmost quality items with ease, convenience, and minimize our environmental footprint. We do so by reusing shipping material including boxes, paper, Styrofoam, bubble wrap etc. Our packages may not look the prettiest when they arrive, but you can be assured that your item is packed safely and securely while being environmentally friendly.

Price: 174 USD

Location: New Gretna, New Jersey

End Time: 2024-09-26T02:12:08.000Z

Shipping Cost: N/A USD