Neje Air Assist Upgrade (Left Side) Laser Cutter & Engraver

Description: This is our premium and shop favorite for the Neje 30 watt, 40 watt, or 80 watt laser module.Get deeper cuts by removing the debris with our air assist. Cleaner engravings and overall better performance. The Actuated Links make it easy to adjust your nozzle and place it at a perfect 2mm-3mm from the burn surface. If you have shop air, we recommend between 20-25psi. Small pumps will show great improvement as well but not as good as the larger pumps. We love this on our in house laser and think you will love it too. Truly a game changer in our shop. This is for the left side of your module, if facing the acrylic shield.Includes:-Attachment Bracket-2 x Universal Joints-Air Nozzle / Air Hose Attachment Point (22mm length by 2mm diameter tip size)-6 feet of silicone air tubing Included Tools Required:2mm allen wrenchInstall:-Assemble the Air Assist-Unscrew the 2 lower screws (on either left or right side depending on the product you purchased) which attach the laser shield to the module.-Place Air Assist bracket onto the module, making sure to line up the holes in the attachment plate to the holes in the acrylic.-Secure the Air Assist with the stock screws from the Neje that were just removed.-Install your 6mm hose (not supplied). Soft silicone tubing is recommended. Add-on available in this listing.-Guide hose through the hose guide hole next to the KGD logo and up to the stepper area.-Secure hose with zip ties to the wire loom.-Place Nozzle at 45 Degrees 2-3mm from laser dot on workpiece.-Create some art!If you need recommendations for your air pump send us a message.*The laser and hose shown is for illustrative purposes only and is not part of the offer.

Price: 12.99 USD

Location: San Diego, California

End Time: 2024-09-03T23:16:07.000Z

Shipping Cost: 10.4 USD