Description: Removex is a highly effective chassis degreaser and cleaner, designed to remove heavy dirt such as oil, grease, clay, mud, and organic matter from chassis, iron and wood bodies. How to use: 1. For heavy cleaning, spray the product diluted in a ratio of 1L to 10L of water on the surface to be applied 2. Wait 1 to 3 minutes and then rinse thoroughly with a jet of water 3. In case of lighter cleaning, the product should be diluted in a greater proportion Alumax is an acidic scale cleaner, developed for cleaning wheels, chassis, engines, aluminum trunks, stainless steel bodies and wood. It is a concentrated and economical product to use, acting on dirt and removing all the adhered surface layer. DILUTION: 1:10 Note: Depending on the dirt, it can be diluted more or less. HOW TO USE: Dilute the product to the indicated concentration; Apply to the entire surface to be cleaned, using a spray or gun resistant to acid products; Wait 1 to 2 minutes and then remove the excess well with a jet of water. V-MOL is a biodegradable car wash with a slightly basic pH that does not harm the surface. Ideal for washing cars, especially for removing difficult dirt, such as removing mud and oil. Dilution Light dirt/ Maintenance 1:100 Average dirt 1:50 Heavy Dirt 1:10 -Focused -High performance How to use: 1.Dilute the product in the indicated proportion 2.Start washing with the help of a microfiber glove, always starting from the upper parts of the vehicle 3.Immerse the glove in the solution and rub gently until the vehicle is completely 4. Rinse then until all the product is removed 5.Dry the vehicle completely to avoid stains. Prizm restores transparency to automotive glass and removes encrusted water marks, impurities and contaminants that cannot be removed with conventional cleaning. The product acts chemically against stains and dirt, easily removing it from windshields, side and rear windows. Dilution: Ready to use Important: The product cannot be applied to car mirrors When handling Prizm, we suggest the following guidelines: -Use nitrile latex gloves during the entire product application process -Do not let the product run onto the paintwork, as this may cause irreversible stains -It is highly recommended to carry out testing on a small area of the glass to check the application results before starting to use the product -Prevent the product from drying on the applied surface. If this happens, dampen the microfiber towel again and reapply -Keep the product in its original packaging and do not reuse it -Keep Prizm out of the reach of children and pets -Intense and long-lasting shine -Full protection How to use: 1. Test a small area to check the result 2. Apply a small amount of product to a microfiber towel 3. Rub the glass using lateral back and forth movements, exerting moderate pressure, in an area no larger than 60 x 60 cm for at least 40 seconds, without letting the product dry. 4. If it dries, dampen the microfiber towel again and reapply. Then rinse with plenty of water STRIKE is a product with a balanced formula that works to remove tar and most glue residue from stickers and sticker labels in general. DILUTION: Ready to use. Strike can be used to remove embedded dirt. We do not recommend using the product on headlights or polycarbonate surfaces. DOES NOT HARM THE VARNISH DOES NOT CAUSE STAINS REMOVES MOST STICKER GLUE Contains: -01 Removex Chassis Cleaner 1.5L -01 Vonixx Alumax Concentrate for Vehicle Automotive Wheels Aluminum Cleaning 1.5L -01 V Mol Automotive Descaler 500ml -01 Prizm Glass Restorer 500ml Vonixx -01 Strike Automotive Tar and Glue Remover 500ml Vonixx
Price: 140 USD
Location: BeautyFair Distribution Center
End Time: 2024-11-04T22:52:17.000Z
Shipping Cost: 19.98 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
