YZ125 YZ250 YAMAHA Graphics 2002-2021 Polisport Restyle Plastics Stock 2015-2021

Description: Graphic Kit Fits *THIS DOES NOT FIT STOCK 2002-2014 PLASTIC THIS GRAPHIC KIT IS FOR RESTYLE PLASTIC* Polisport Restyle Plastic Kits 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Stock Plastics 2015 2016 2017 2018 2019 2020 2021*RIDER NUMBER INCLUDED PLEASE LEAVE RIDER NUMBER IN ORDER NOTES* YAMAHA YZ125YAMAHA YZ250 *PLASTICS NOT INCLUDED* Graphic Kit Includes Graphic Kit IncludesLeft and Right Shroud Decals Left and Right Tank Decals with Perforations Front and Rear Fender Decals Front and Rear Numberplate Decals with Rider NumberLeft and Right Fork Guard DecalsCorrect installation of you graphics is vital to ensure you get the best results from our product. BEFORE INSTALLATION: First, you will need to prepare your plastics/surfaces for your graphics to adhere properly.All surfaces, especially brand new plastics, need to be wiped and cleaned using an appropriate adhesive removing solvent.We recommend that you use methylated spirits or a contact cleaner.Allow surfaces to air dry before installing your new graphics. INSTALLING GRAPHICS: Take your time when installing your new graphics, as rushing the process will increase the likelihood of making mistakes. Carefully align the graphic decal with the corresponding plastic piece. Begin to peel some of the backing paper off of a small section of the graphic decal and stick it to the plastics surface.Gradually remove more of the backing paper as you proceed to install the graphic decal, ensuring correct alignment with the plastic. If you find that the decal is starting to ripple, or you need to bend/stretch the graphic to conform to the shape of the plastic, use a hair dryer or heat gun to make the decal more pliable. Do not over heat the graphics material though, only a small amount of heat is required. Once all of the graphic decals have been installed correctly, it is recommended that you heat all the newly installed decals on the bike to securely set the graphics adhesive to the plastics. AFTER INSTALLATION: Check your graphics the next day and apply heat on any areas that may have lifted overnight and press them back down, repeat this process for any areas that continue to lift - they will stay down after a few tries. LEAVE THE NEWLY INSTALLED GRAPHICS ON THE BIKE FOR UP TO 72 HOURS AFTER INSTALLATION BEFORE RIDING THE BIKE. To ensure you get the most out of your graphics decals the adhesive needs this time to set properly.Riding sooner will reduce the life span of your graphics. If you are unsure about any part of the installation process and require further information,we recommend that you consult one of the many graphics installation tutorial videos available online.

Price: 135.55 USD

Location: Pauma Valley, California

End Time: 2023-12-29T19:21:54.000Z

Shipping Cost: 13 USD